BEAVER DRILL
Click for Drill Specifications
| Stroke | 60 in. | mm |
| Weight | 700 lb. | kg |
| Width | 2 ft - 6in. | mm |
| Length (tower down) | 7ft - 0in. | mm |
| Height (tower down) | 7 ft - 6in. | mm |
| Height (tower up) | 11ft - 3in. | |
| Lateral Movement (side-to-side) | ||
| Slide Base (out) | ||
| Extension | ||
| Down Force | 2,500 lbs | 1,134 kg |
| Retraction Force | 2,500 lbs | 1,134 kg |
| Hydraulic Pressure (system) | psi | bar |
| Hydraulic Flow Rate (system) | gpm | Lpm |
| Hammer System | Cat Head Hammer | |
| Fuel Capacity (diesel) | gal | L |
| Engine (gas) | Hydraulic Power Pack | |
| Engine Power | hp | Kw |
| Surface Load | lb/in² | kg/cm² |
| Winch Rating | lb. | kg |
| Winch Speed | fpm | m/min |
CME Hammer Specifications |
||
| Hammer Weight | 140. lbs. | |
| Hammer Drop Distance | 32" | |
| Hammer Drop Rate | 20 hits a minute | |
Rotation Specifications |
||
| Torque (high torque/low speed) | 487 ft. lb. | 660 N·M |
| Torque (low torque/high speed) | ft. lb. | N·M |
| Hex adapter | in | mm |
| Rotation speed (low speed) | rpm | |
| Rotation speed (high speed) | 122 rpm | |
The beaver drill is lightweight and portable. It can be pulled into offroad sites by our ATV, moved by hand, or even dropped by helicopter. This drill works especially well with indoor applications, being able to fit through most doorways, having a low total height with the tower up, and an even lower total height when the tower is not required. With 50' of hydraulic line, the power unit can often be left outside - allowing for indoor drilling without concern for exhaust fume accumulation.
