CME 55 TRAILER MOUNT
Click for Drill Specifications
| Stroke | 72 in. | 183mm |
| Weight | 6,000 lb. | 4536 kg |
| Width | 7 ft - 3 in. | mm |
| Length (tower down) | 17ft - 0in. | mm |
| Length (with truck) | 32ft - 0 in. | mm |
| Height (tower down) | 7 ft - 8 in. | mm |
| Height (tower up) | 21ft - 0 in. | |
| Lateral Movement (side-to-side) | ||
| Slide Base (out) | ||
| Extension | ||
| Down Force | 18,650 lbs | 8,460 kg |
| Retraction Force | 28,275 lbs | 12,826 kg |
| Hydraulic Pressure (system) | psi | bar |
| Hydraulic Flow Rate (system) | gpm | Lpm |
| Hammer System | CME Automatic Hammer | |
| Fuel Capacity (diesel) | gal | L |
| Engine (gas) | Ford, straight 6-cylinder | |
| Engine Power | hp | Kw |
| Surface Load | lb/in² | kg/cm² |
| Winch Rating | lb. | kg |
| Winch Speed | fpm | m/min |
CME Hammer Specifications |
||
| Hammer Weight | 140. lbs. | |
| Hammer Drop Distance | 32" | |
| Hammer Drop Rate | 50 - 60 hits a minute | |
Rotation Specifications |
||
| Torque (high torque/low speed) | 7,333 ft. lb. | 10,484 N·M |
| Torque (low torque/high speed) | ft. lb. | N·M |
| Hex adapter | in | mm |
| Rotation speed (low speed) | rpm | |
| Rotation speed (high speed) | 690 rpm | |
The original CME rig that Determination Drilling started out with. This CME 55 is mounted on a tandem axle trailer and pulled by a Chevrolet 3500 truck. Because of its size and manouverability, it allows for excellent access to confined sites, parking lots or moderatley off road areas. With its shorter tower height this rig has been indoors in multiple factory sites without shutting down operations in the plant.
Our CME 55 trailer mount is capable of drilling with solid stem and hollow stem augers and can be equipped for rock coring and wash boring.
